Youxmoto Go Kart Clutch 3/4" Bore 12T with #35 Chain, 12 Tooth Centrifugal Clutch and Chain for Go Kart Mini bike/for Honda cloned Engines GC160, GC190, GX120, GX140, GX160, GX200-2-6.5hp, 3/4" Shaft

Features

• 【BROAD COMPATIBILITY】: This 3/4 clutch 35 chain Perfect for Go Kart, Mini bike, Fun Kart, and any other engines with 3/4 crank shaft and 3/16” key way, NOTE: 1, Apply lubricating oil before use; 2, After installation, start it 3-5 times for running-in
• 【FITMENT】: Fits 2-6.5hp Fits for Honda & Honda cloned engines GC160, GC190, GX120, GX140, GX160, GX200. Fits for Briggs & Stratton 2 - 6.5 HP with 3/4" Shaft 212 212cc Predator Engine Clutch, and Common clutch for 3.5-7hp engines using #35 Chain.
• 【Usage Tip 1】: Before using the product, you can drop lubricating oil above the retaining ring, fill it up in a circle, wait for it to seep in, then rotate the clutch. If there is no obstruction during rotation, there is no need to disassemble it. (The oil dripping position can be seen in the picture below)
• 【Usage Tip 2】: When this product is first installed and started to operate, it needs to be run-in 3 to 5 times to avoid the problem of insufficient contact area of the internal parts of the clutch due to insufficient speed, which may cause slippage and smoke due to friction. The specific measurement steps are as follows: First, run the engine no-load until the clutch is engaged for the first time, hold for 10 seconds, and then turn off the engine to cool down. Second, gradually increase the load three times, from 0 to full speed, with a 2-minute interval for cooling each time. If there are no issues with the appeal process, it can be used normally.
• 【WORK WITH】: 3/4" Bore 12 Tooth Centrifugal Clutch with 4 Feet #35 Chain for 2-6.5 HP Engines, Engagement Speed 2300±300 RPM.
• 【PACKAGE INCLUDED】: 1 x Centrifugal Clutch, 1 x 4 Feet #35 Chain, 2 x Set Screws and 1 x Connecting Link.
• 【Quick reply】: Quick reply within 8 hours; Provide technical support, If you encounter any questions on our Products.