YHXMARSCAN Screen for Apple Watch Series 3 GPS 42mm LCD Display Replacement for Apple Watch Series 3 GPS 42mm Touch Screen Digitizer Assembly(Not for 38mm)

Compatible with: Replacement screen for Apple Watch Series 3 GPS 42mm. Package list: 1* for Watch Series 3 GPS 42mm lcd display 1* Set Repair Tool Kits Installation Tips: 1.Avoid to pull the flex cable too hard. 2.Do not press LCD hard, it is easy to damage. 3.Please search on Youtube to search "for Watch Series 3 GPS 42mm screen replacement repairing" repair video before installation. 4. Do a test before installation may can help you do better. 5.Please keep your Watch Series 3 GPS 42mm phone power off and disconnect the battery cable when assemblying. 6.Check the Watch Series 3 GPS 42mm screen replacement to make sure the flexible cable in good condition and no debris/visible dust on the connector. Notes: If your phone meet with the problems, such as lines on screen, cannot turn on, flash, touch insensitive, black screen, white screen, etc, please follow steps below: 1. Disconnect the battery cable to ensure that the A528B screen replacement is in a no-power condition. 2. Check the Watch Series 3 GPS 42mm screen replacement to ensure the flex cables are in good condition and no chippings on the interface. 3. Reconnect the flex cables from the motherboard side. 4. Get it charged for minutes and then restart it. 5. Put the phone in dry environment for hours. Static electricity maybe result in this condition after installing. You just need to leave it alone for a night. During and after installation, if there is any problem with the Watch Series 3 GPS 42mm screen replacement, please contact the shop customer service directly to solve the problem faster.