YHTAUTO 5X150mm Hub Centric Wheel Spacers 1.25 inch Compatible with Toyota, Lexus Models, Tundra, Sequoia, LX570 5x5.9 Tire Spacers w/ M14x1.5 & 12.9 Grade Studs, 110mm Hub Bore 5 Lug 4PCS Black

Features

• Custom Fit 5 Lug Wheel Spacers: The spacers for car---Compatible with Lexus, Toyota Models: 2007-2021 Tundra| 2008-2022 Sequoia| 1998-2011/2013-2021 Land Cruiser| 1998-2007 LX470| 2008-2011 LX570| 2013-2021 LX570; Spacers come without lip; For full models refer to the amazon garage tool or our picture
• Hubcentric Bolt-On Wheel Spacers: Tire Spacers have a lip that fits around your vehicle's hub. Spacers put all the pressure right back onto the hub and are more secure than lug centric spacers and you don't need to buy hub centric rings separately
• About the Tire spacers: 5x150mm(5x5.9") vehicle PCD (bolt pattern) and 110mm(4.33") hub bore must match | 31.75mm(1.25") thickness, this is also the size at which the wheels will be pushed out | M14x1.5 Studs & Lug Nuts| Recommended torque：85-90 FT/LBS | 12.9 grade studs, highest grade of bolt strength
• Safety Tips for Installers: Be sure to not only follow the recommended torque specifications, check regularly for looseness and tighten to the recommended torque, clean the surface of the wheel and hub of rust, but use high-strength thread locker we are equipped with on the stock studs that the spacer bolts to. It is recommended to drive 50-100 miles to re-tighten after initial installation, then operate again every 2000-3000 miles
• What You Will Get: 4pcs 5x150mm(5x5.9") wheel spacers, 2pcs high strength thread-locking, 1pc installation instructions and professional customer service support, do not hesitate to contact us if you have any doubts or queries; Once installed, gives the truck the clearance and tougher look you want, and handles much better