Underground Cable Locator, VXSCAN F04 Underground Wire Locator with Earphone Cable Tester for Locating Breakage Cables, Irrigation Wires, Pet Fence

Features

• SAVE TIME AND MONEY - The VXSCAN F04 Underground Wire Locator is your trusted companion when it comes to swiftly and precisely locating break-points and tracing underground and wall-through cables. Take control of cable detection and repairs with ease, right at your fingertips. Save time and money by handling cable maintenance independently
• WHERE YOU CAN USE - The F04 wire locator can be used to detect Pet Fence cables, Pipeline cables, Underground Irrigation cables, cables in the construction area, etc. The Underground Cable Locator is designed for single-strand or parallel double-strand wires, it is not suitable for multistrand wires. Double Strand Wire: The product will work, but you need to try another line, if you don't find a breakpoint on another line
• UPGRADED VERSION, UNDERGROUND WIRE TRACER - The F04 Underground Cable Locator is powered by a high-performance 9V electronic technology battery, which can last for 3-4 hours under normal conditions. When the battery is in the best condition, the detection length can reach 1000 feet and the depth is within 3 feet. As with any battery-powered device, the signal of the F04 underground wire locator may weaken as the battery power decays
• SIMPLE TO USE - 1. Install batteries, then hold the power button for at least 3 seconds to turn on the transmitter and receiver respectively. 2. Adjust the transmitter’s power and get the receiver slowly close to the transmitter until you can hear and judge the sound in search of cables. 3. The red line of the transmitter clips the cable to be detected, the black line doesn’t have to be connected.
• ENHANCE EFFICIENCY IN NOISY ENVIRONMENTS - Our Underground Wire Locator Buried Wire Locator comes equipped with a pair of 3.5 mm headphones. By minimizing external noise interference, you can concentrate on detecting and tracing cables without distractions, ensuring optimal efficiency and accuracy. Simply adjust the SIGNAL STRENGTH knob to control the signal strength, and Turn DOWN the TRANSMIT strength or the RECEIVER sensitivity knob to help trace the wire
• WARM TIPS 1 - If the line length does not reach the measurable range and the line cannot be detected, please check/operate the following steps first - 1. Check if the battery power is too low. If the battery is low, replace it with a new one please 2. Is the transmit power adjusted to the maximum? If not, you need to adjust the transmit power to the maximum, and then slowly turn down the power to locate the line
• WARM TIPS 2 - Did you make ground stakes by yourself before use? If not, you need to make ground stakes yourself, and the black clip on the transmitter needs to be connected to the ground stakes, which can enhance the signal If you have done all the above steps and still cannot detect the line, please feel free to contact us
• WARM TIPS 3 - Is the detection range too large and inaccurate? When looking for the cable to be tested, it is necessary to adjust the power of the transmitter and receiver to the maximum, to find the cable to be tested conveniently. After finding the cable to be tested, it is necessary to gradually reduce the power according to the test requirements to narrow the detection range and accurately locate the line