TsuperU 8.4" Uconnect LCD Display Touch Screen Replacement, Digitizer Screen for 2019+ Jeep Grand Cherokee Chrysler Pacifica and RAM Trucks Radio OEM Navigation System, Uconnect 4 Monitor Touchscreen

Features

• Replacement OEM Part Number: LCD touch screen compatible with uconnect 4, UAV, UAG Navigation Radio Display, if your OEM screen is cracked, delamination, blistering, ghosting and other bad touch, just replace the 8.4 inch lcd screen and digitizer, you won't have to go to the dealer for replacement as he will suggest you to replace the whole radio which will cost thousands of dollars but it is not necessary, just watch the related replacement video
• Applicable vehicles: 8.4 Uconnect screen replacement for 2019 2020 2021 2022 Jeep Grand Cherokee radio screen, for 2018-2020 Chrysler Pacifica radio screen, for 2019-2021 RAM radio screen, Please check the OEM number and size carefully before purchasing to make sure the lcd monitor screen fits your car
• EASY PROBLEM SOLVING: If your display screen is cracked, delaminated, blistered, porous, leaking viscous liquid, unresponsive, has garbled touches, phantom images, ghosting, dead pixels, unresponsive, poorly touched, or poorly looking, all it takes is an uconnect screen replacement to restore it to its original functionality without the need for expensive repairs at the dealership, and you're good to go! No need to go to the dealer for expensive repairs
• EASY TO INSTALL: This LCD display is designed to be easy to install, just watch the video to REPLACE uconnect touchscreen at home without having to go to an expensive dealer for repairs, it is an affordable alternative to repairs. radio screen with uconnect 8.4 4C oem navigation system Fully compatible. Installs fully plugged into your ribbon cable and in the correct position, make sure you remove the protective film from the screen (can be hard to see)
• IMPORTANT INSTALLATION NOTE: Sometimes you may lose some of the functions and icons on your monitor after installation, sometimes the digitizer screen will jump around or ghost after installation, this is normal, nothing is broken. As long as all the cables are connected, and as long as you drive for a day or two, all the computers are synchronised and all the icons will be back to normal. If you experience phantom touch on your new screen, double check the ribbon cable