Shion.Kwoo Upgraded 6PCS 3D LCD Printer Screen Protector for Anycubi Photon M3 max,Size:13.6inch,Screen Protective Film for Anycubic photon M3 max Resin 3D Printer.

Features

• 【Upgraded Material】: 6 pieces of cost-effective upgrade, using imported double-sided coated PET film, the thickness is only 0.1mm, the light transmittance is as high as 95%, and it supports ultraviolet penetration at a wavelength of 405mm, which does not affect the accuracy of the printer.Customized development of real printer sizes to avoid size and hole position errors, and perfectly adapt to your printer.
• 【Product Features】: This product is a screen protective film. The main function is to prevent the FEP or nfep film from being damaged. When the resin overflows, it will damage and contaminate the screen, causing damage to the screen. Maximize the service life of the LCD screen and reduce the cost of use and maintenance.
• 【Suitable Models】: This package includes 6 pieces of screen protector + cleaning sheet + installation scraper; this product is suitable for Anycubic photon M3 max Resin 3D Printer.
• 【Installation Instructions】: 1.Use alcohol tablets and cleaning sheet to clean the screen, make sure there is no dust, and keep it dry.2.Tear off the back film of this product,adjust the installation angle, and slowly cover the screen from one side. During the covering process, you need to use a scraper to remove air bubbles at the same time until the protective film covers the entire screen.3.Tear off the first layer of the protective film and make sure there are no air bubbles.4.After re-leveling, start testing printing.
• 【After-sales Service】: Please note that during the film process, some very small air bubbles may be left behind. Please try to make sure that the air bubbles are around the screen, which will not affect your printing effect.If you have any quality and size problems, please contact us as soon as possible, and we will provide you with 7x24 hours after-sales service.