Saillong 2 Pack Upgraded Aluminum Housing Fluorescent Starter with 4-40W Preheat Lamps, CE Certified Fluorescent Tube Neon Starter Use in 110-130V (Compatible with FS-5)
Saillong 2 Pack Upgraded Aluminum Housing Fluorescent Starter with 4-40W Preheat Lamps, CE Certified Fluorescent Tube Neon Starter Use in 110-130V (Compatible with FS-5)
Description
If your fluorescent lights still don't light up when you turn them on, it's time to consider a new starter. CE marking quality trustworthy. Nice fit note the model number. Fluorescent starter for use with 4/6/8W preheat fluorescent lamps. Specification: Material: aluminum Quantity: 2 pack Compatible with FS-5 type ballasts Light Type: Fluorescent Voltage: 110-130v Wattage: 4-40W Package includes: 2 x Fluorescent Starter Warm notes: Make sure you adjust the current and voltage to the right level before use or it won't light up/too slow to light up. The current of the ballast should be the same as that of the starter. Should be given not to remove the aluminum casing from the starter and stare at that glow discharge too long without suitable eye protection because it could be giving out a lot of short wave UV that might cause an eye injury. Fluorescent tubes had an expected serve time that was based on the number of times you started it up.
Item Details
Pickup Location
4031 Market Center Dr Suite 303
North Las Vegas, NV, 89030
Quality
Auction closes
October 24, 2025 at 2:15 AM
Estimated Retail Price
$6.99
Buyers Premium
15%
Inventory Number
1055539270
Found in
Additional Details from the Manufacturer
This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing
brand
Saillongcolor
SilverMore features
- [Trustworthy Quality]: this Compatible With FS-5 model fluorescent starter is made of aluminum studded base plate and quality plastic housing; Snap design is more convenient; The quality is CE certified and trustworthy; It is not easy to break and ignite; Note: please check the rated voltage and current before use
- [Easy to Replace]: the replacement fluorescent starter process is simple; The position of the fluorescent starter is on the side of the fluorescent lamp, only needs to counterclockwise can be pulled out the starter to replace the replacement parts, and then replace the fluorescent starter, the replacement parts can be screwed clockwise to lock in place, and then turn on to check whether the light is on, if not, then you need to replace the fluorescent lamp
- [New Version Starter]: the fluorescent bulb starter is a small cylindrical device; Unlike traditional starters, our new version of fluorescent starter is filled with penning gas, which nicely reduces the fire voltage when the metal contacts come into contact, which can extend the service time of the starter
- [Recognition of Failure]: you can easily tell if the glow starter is not working; Turn on the power switch, the fluorescent lamp flickers for a long time or does not light up then needs to be replaced; If you want to test the glow starter to see if it is shorted, you can use a multimeter to link the two terminals at the bottom (with the power disconnected); If the multimeter shows a number, it is a short circuit
- [Decorative Use]: the fluorescent light starter not only helps to restore fluorescent lights to normal use but also can be applied as fairy lights to decorate for Halloween, Christmas and other festivals; Simply connect the string lights ( requires compliance with starter voltage conditions) in series with the fluorescent light starter to get a strobe mode fairy light
Getting Started
Learn more about bidding, winning, pickup, and more on our video tutorials page.
Visit Video Tutorials