SUNLU PLA Plus 3D Printer Filament 1kg, Dark Grey

SUNLU PLA Filament is are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, with no odor during the printing. It is suitable for fast printing and printing large-sized models, printed products have flat and smooth surfaces. FAQ Why can't the filaments stick to the hotbed easy 1). Check the temperature setting before printing, PLA filament temperature about 190-220 2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue 3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate Tips: 1).Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture. 2).Be sure to insert the free end of the PLA+ filament into the holes to avoid being tangled for next time use. 3). If there is no print plan within a few days, retract the filament to protect the printer nozzle.

These 1. FAQs: Why can't the filaments stick to the build bed? 1. Check the temperature setting before printing, PLA filaments have lower extrusion temperature; 2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure an strong first layer adhesion; 3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate; 4. If the effect is not good, it is recommended to try printing the draft before printing. Specification: Temperature Recommended Extrusion/Nozzle Temp: 190°C - 220°C (374°F~ 428°F), Heated Bed Temp: 25°C - 60°C (77°F~ 140°F) Filaments Diameter and Accuracy: 1.75 mm +/- 0.02mm Filaments Net Weight: 1 kg (2.

PLA Filament PLA filament is eco-friendly, low shrinkage, high strength material. It compatible with all types of FDM 3d Printer, suitable for printing artworks and crafts. 100% no bubble 3d Printer filament. Specifications Diameter: 1.75mm Tolerance: +/-0.02mm Print speed: 50-100mm/s Recommend print Temperature: 190-220°C Net weight: 1kg with spool Gross weight: 1.3kg Length:1.75mm(1kg)=330m