Rockwood 491.26D Brass Floor Mount Automatic Door Holder with Stop, Satin Chrome Plated Finish, 1/2" or Less Door to Floor Clearance, Includes Fasteners for Use with Solid Wood Doors and Wood Floors

The Rockwood 491.26D automatic door holder is made of brass with a satin chrome plated finish, has a floor-mounted strike for use with doors that have 1/2" or less of clearance under the door, and includes fasteners to attach the holder to a solid wood door and the strike to a wood floor. The door holder's roller catch automatically latches to the strike to hold the door open and releases by a gentle pull. The floor-mounted strike also acts as a stop to protect adjacent walls. The door holder includes four #10 x 1-1/4" flathead wood screws for attaching the holder to the door and three #12 x 1-1/4" flathead wood screws and three plastic anchors for attaching the strike to the floor. Slotted mounting holes permit alignment adjustment of the body during installation. The satin chrome plated finish matches the Builders Hardware Manufacturers Association (BHMA) 626 architectural finish code. The door holder meets American National Standards Institute (ANSI)/BHMA A156.16: L01301 specifications. SpecificationsClearance door to floor1/2" or lessHolder base dimensions2-1/2" x 2-3/4" (H x W)*Holder projection2-1/8"Strike base dimensions2" x 4" (H x W)*Strike projection1-1/4"Rockwood/BHMA finish codeUS26D/626Specifications metANSI/BHMA A156.16: L01301Weight1.5 lb. *H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right. Rockwood Manufacturing Company manufactures door hardware. The company, founded in 1946, is headquartered in Rockwood, PA. What's in the Box? 491.26D door holder body 491.26D strike (4) #10 x 1-1/4" flathead wood screws (3) #12 x 1-1/4" flathead wood screws (3) plastic anchors