QuliMetal Fire Burn Pot and Hot Rod Ignitor Kit - Replacement Parts for Traeger & Pit Boss Pellet Grills - Heavy Duty Fire Pot, Grill Igniter with Ash Remover, Screws & Fuse

Features

• 🔥【Perfect Fits】- The Grill Replacement Parts for Traeger and most Pit-Boss pellet grills (NOT ALL Pit-Poss, EXCEPT PTG). 🔥【Not Fit】- Don't fit Traeger Tailgater 20, Pit Boss 1150 grills; not compatible with Traeger Pro 575 and 780, Ironwood 650 and 885, Timberline 850 and 1300 (Gen 2 only), Silverton 620 and 810, Century 885 wood pellet grills with D2 Direct Drive and WiFIRE Technology, please Learn more “D2 Hot Rod Ignitor Kit”
• 🔥【Dimensions】- Fire Burn Pot: 5" x 3 1/2" x 3 3/4", 7 Large air holes, 14 gauge steel wall. Total length of Hot Rod: 30". Hot stick: 3.7". High density cartridge heating element, 200W/120V wire lead, identical match to the OEM hot stick
• 🔥【Material & Valuable Package】- The grill burner made of heavy duty stainless steel to ensure long-lasting use, more substantial and durable. Includes 1 fire burn pot, 1 hot rod ignitor, 1 ash remover, 1 fuse, 1 set of screws
• 🔥【Easy to Install】 - Plug and play wiring, took only about 10 minutes to replace. For better performance, only 1/8 inch to 1/4 inch of the wire should be visible in the fire burn pot
• 🔥【Installation Tips】- 1) Remove and save the screws from the old fire pot. 2) Rotate the fire pot 45 degrees so the corners point outward and are not parallel to the auger anymore. 3) Lift the outward flang (away from the auger) of the fire pot to pull the part up and out from the auger tube. 4) Replace in reverse order either using the new screws if they fit, tap threads into your existing grill to accept the new screws. If new screws can't work on your grill, please use your old screws