Partsam High Mount Stop Light Third 3rd Brake Light Replacement for F250 F350 F450 F550 Super Duty 1999 to 2016 / Ranger/B series LED Rear Cab Roof Center Mount Brake Stop Tail Cargo Light Lamp (Red)

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• Package includes 1pc Rear high mount third brake light,compatible with F250 F350 F450 F550 Super Duty 1999 to 2016,Explorer Sport Trac 2001 to 2005,Ranger 1993 to 2001,B2300 1994 to 2009,B3000 1994 to 2007 and B4000 1994 to 2009 Led 3rd Brake Light Tail Light Lamp(NOTE: only Fit Models with Cargo Lights,non cargo model may need some modification); Part Numbers: YC3Z13A613BA, CC3Z13A613B;
• About F-series third brake light: Chrome Housing Red lens, Super Bright full LED lights. Don't have to worry about incandescent light bulbs blowing or fading overtime; Installation is easy, please clean the truck area and lip on light with alcohol. Then, attached to the light first. Rubber "O" Ring Washers are included; Note: please save your two screws because the screws are not included with the new lights. It will add a more modern look to your truck with LEDs instead of incandescent bulbs;
• Waterproof: This B-Series third brake light includes 1pc foam gasket and is generally waterproof. Please kindly put a little silicone or some clear RTV all across the top to help seal it just in case it leaks into the light or where the wires are;
• About the cargo lights: 1. The red lights come on with the brake, and the white lights come on when you turn on the interior dome lights; 2. Please note that the two outer white lights are not reverse lights. They are controlled by your interior light switch. We call it Cargo Lights; 3. if your truck originally has no cargo lights, please run a wire from the dome light to the connector, and it will work;
• Tips: 1. The original lamp may have multiple plugs, but for this lamp, there is only 1 plug, please left empty the extra ones of the factory sockets; 2. don't over tighten the screws in case it broke