PROZRTED Hot Water Recirculating System Pump Control 2 pcs

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• PROZRTED pump control was only designed to set temperatures in all three modes or start the pump running in manual mode. The middle button was designed to start the pump when the pump was set in "manual" mode. Very simple product and easy to use.PROZRTED pump remote controller can work with PROZRTED HBS24-12 and HBS24-12A smart circulation pumps. This remote control can not work with HBS24-12T and XPH
• The default temperature of HBS24-12 and HBS24-12A is 38 degree C off and 33 degree C on. If you need to set higher or lower water temperature (From 32 degree C to 42 degree C), We provide the pump remote controller for you. When the pump was set in “manual mode”, If you start the pump by the remote control, the pump will work for 60 minutes. It means that in one hour, the pump will measure the water temp, if the water temp is lower than what you set, the pump will start to work.
• One 27A 12V alkaline battery was included. Just lift the buttons and take these three buttons off for the battery replacement or screw installation.
• 433 RF Easy installation. Double sided strong foam adhesive pad was included. The distance between the remote control and the pump must be less than 49ft. To pair with the pump: 1. Unplug the pump and plug the pump back. 2. After that, short press any button in the control in 5 seconds.
• The max setting temperature is 42 degree C and the lowest setting temperature is 34 degree. The fixed temperature range is 5 degree C. For example, if the setting temperature is 42 degree C, when the water in pipe is over 42 degree C, the pump will stop working and then the pipe water temperature is lower then 42-5=37 degree C, the pump will start to work. If you are not completely satisfied with our product, please feel free to contact our customer service team.