PROOTOM Motorcycle Seat Cover Universial Dirt Bike Gripper Soft Seat Cover Cushion with Particle Surface for CRF YZF RM KXF KLX TTR SX EXC (Black)

1. Install the motorcycle polo tool is a nail gun, one quarter inch nail, screwdriver, pliers, scissors. 2. Remove the seat bottom seat from the motorcycle. 3. Put the new seat cushion sets of seat, make sure the seat cushion set in the center of the base, with a nail gun on the base with good stitching needle fixed on both ends. 4. Then it with stitching needle fixed on both sides of the center. 5. slowly down the side of the seating of the stretch to flattening fold, then immediately with stitching needle fixed. 6. be careful to seating head stretch until smooth smooth, then use stitching needle fixed. 7. be careful to seating tail stretching until smooth smooth, then use stitching needle fixed. 8. If you find a seat covers the middle fold, please remove some stitching needle, then tweak fold and fixed it up. 9. Carefully remove extra seating material with scissors. It is about 1 cm far from stitching needle. 10. Installed new seating base put back in the motorcycle later on.