OLED for Google Pixel 7 Screen Replacement for Google Pixel 7 LCD Digitizer Repair Kits for Google Pixel 7 GVU6C GQML3 Display Touch Screen Assembly Replacement with Frame (with Fingerprint)

Our Screen Is High Quality LCD Display Touch Screen Digitizer Assembly Replacement with frame For Google Pixel 7（Not fit for Google Pixel 7 Pro） NOTE: Supports fingerprint functionality, but the fingerprint flex cable needs to be removed from your old screen and requires calibration before removal. Product Description: -Material: AMOLED -Model: GVU6C, GQML3 -Size: 6.3 inches -Suitable For: For Google Pixel 7 LCD Display Touch Screen Digitizer Assembly Replacement with frame -Package Including: 1x LCD Touch Screen Assembly Replacement 1x A Set Of Custom Professional Disassembly Kits [Question 1] Why isn't the fingerprint sensor recognizable after replacement? Causes: The flex cable is not properly connected, or calibration is incomplete. Solutions: In a dry, static-free environment, power off the device and reinsert the flex cable to ensure a secure connection. Make sure the calibration tool shows "Success". [Question 2] Why does my phone display a green screen after replacement?（black screen too） ① Cause: The flex cable connecting the screen to the motherboard (display flex cable) is loose or internally broken (especially after being dropped or squeezed), causing the red/blue signal transmission to be interrupted, leaving only the green signal functioning normally. Symptoms: The green screen may be intermittent (symptoms change when the phone is shaken), or accompanied by flickering or streaks. Solutions: If you have experience in disassembling phones, you can power off the phone, open it, remove the screen flex cable, and then reinsert it firmly (ensure the clip is fastened). If you have no experience, it is recommended to consult a professional repairer. ② Cause: The chip on the motherboard that controls display signals (such as the display driver IC) is damaged, or the connection line between the chip and the screen is short-circuited, resulting in abnormal color signal processing (only green signals are output). Symptoms: The green screen issue persists even after replacing the flex cable or screen, and may be accompanied by other functional abnormalities (such as slow charging or poor signal). Solutions: Professional repairers need to inspect the motherboard. It can be fixed by "wire bonding repair" (repairing the circuit) or replacing the display chip. If the motherboard is severely damaged, it may need to be replaced (which is more costly). Note: Do not disassemble the motherboard by yourself, as it may cause secondary damage. 【Precautions】 Do not repeatedly press the screen or shake the phone when the green screen occurs, as this may worsen physical damage to the flex cable or screen. Non-professionals should not replace the screen or motherboard by themselves, especially for phones with built-in batteries (disassembly may pose a risk of battery fire).