MIFLUS SPP5 Hard Start Capacitor for Air Conditioner,Increases Compressor Starting Torque 300% AC115V-288V from 4,000 BTU Window Units to 120,000 BTU Commercial Units(1/2 Thru 10 H.P.)-2packs

Features

• 【Installation Instructions】Connect the two wires from the SPP5 in parallel with the run capacitor(one wire each side)without removing any original wires.Use special"piggy back"terminal of the SPP5 if all the run capacitor terminals are being used.Install only on PSC units equipped with run capacitor⚠Be sure to disconnect the power supply before starting maintenance
• 【Parts Number】SPP5 compressor hard start boost capacitor can save compressor aging by increasing compressor starting torque by 300%.Designed for use on permanent split capacitor single phase A/C and heat pump systems.Widely used in air conditioner start capacitor,Air conditioner soft start,AC hard start kit,AC capacitor, hvac capacitor, hvac hard start kit etc
• 【Superiority】The solid-state relay/hard start capacitor and the PTC thermistor are connected in series has no loose parts and no complicated wiring.Only need to be connected in parallel with the running capacitor.Easy to install, saves time and effort and can save you a large amount of maintenance costs
• 【Fix Symptoms】SPP5 Relay Start Capacitor--1⃣Appliance produces noise during startup2⃣System takes a while to startup3⃣You want to reduce energy consumption
• 【After Service】MIFLUS takes customer satisfaction very seriously.If you have any questions about the SPP5, please contact us through our Amazon homepage.⚠Please check whether the package is damaged due to transportation problems as soon as you receive it