MDS47123619 Door Gasket Compatibile with LG Front-Load Washing Machines WM3270CW WM3270CW/00 WM3500CW/00 WM3670HVA/01 WM3700HVA/00, Door Boot Seal with 383EER4001A Washer Spring Expansion Removal Tool

Features

• ⭕【𝗖𝗼𝗺𝗽𝗮𝘁𝗶𝗯𝗹𝗲】 MDS47123619 washer door seal is compatible with the models of LG washers :WM3500CW/00, WM3270CW, WM3270CW/00, WM3080CW/00, WM3180CW/00, WM3370HVA/01, WM3670HVA/01, WM3700HVA/00, WM3700HWA/00 and the Kenmore models:41262, 41383, 79641262610, 79641262612. ❗❗❗NOT FIT WM3500CW/01, WM3670HVA/00, WM3700HVA/01, WM3700HWA/01, WM3700HWA/02, WM3700HWA/03.
• ⭕【𝙍𝙚𝙥𝙡𝙖𝙘𝙚𝙨 𝙋𝙖𝙧𝙩 𝙉𝙪𝙢𝙗𝙚𝙧】MDS47123619 gasket replaces AGF75223080, 4511798, AP6236842, PS12081606, EAP12081606. Note: Do not confuse MDS47123619 with MDS47123602 MDS47123605 MDS47123608, they are not interchangeable!!! Please check that the MDS47123619 washer door gasket you order matches your model before buying MDS47123619.
• ⭕【𝗛𝗶𝗴𝗵 𝗤𝘂𝗮𝗹𝗶𝘁𝘆】This MDS47123619 Washer door gasket is replacement part for use in front-loading washing machines. The Door Boot Seal forms a seal between the wash tub and the door, prevent leaks. MDS47123619 washer door boot gasket, Made of the highest quality synthetic material, the washer door gasket has good corrosion resistance and oxidation resistance, durable.
• ⭕【𝗙𝗶𝘅 𝗦𝘆𝗺𝗽𝘁𝗼𝗺】If the washer appears to leak from under the front panel, check the rubber door boot seal for a hole or rip. If you find that the washer door boot is damaged. Replacing this product will restore the washing machine to its original state.
• ⭕【 𝑰𝒏𝒔𝒕𝒂𝒍𝒍】First of all, remember to turn off the power. then, we strongly recommend that you follow the video instructions on YouTube, Replace MDS47123619 Washer Door Gasket, With our matching spring pliers(383EER4001A Washer Spring Expansion Removal Tool ) and gloves reduces removing/installing difficulty and improves work efficiency. Take the top panel and front panel off to make it easier. some models may require you to open the drain hole with scissors.
• ⭕【 NOTE】The MDS47123601 printed on the product you received is the code of the mold, the actual model number of our product is MDS47123619, it can be used normally, please don't worry about this. The MDS47123619 door bellow has a 0.4'' short drain nipple attached to the bottom of the gasket. If your original bellow had a 2" extension drain hose attached to the gasket, you cannot use this gasket without additional hose pieces, couplers, and clamps. Make sure to check the drainage hose type of your original door seal before ordering. (Removing the front spring, removing the front side of your existing gasket, and looking at the hose)