LISEN Electric Retractable Car Phone Mount, iPhone Vacuum Electric Suction Cup Phone Mount, Suction Cup Magnetic Phone Holder, only for Mirror, for iPhone 17 Pro Max Plus 16 15 ~ X, Samsung Galaxy S25

Features

• 🚩🚩🚩 Important Installation Information: This car mount is engineered for smooth, flat surfaces (e.g., windshields, screens) to ensure a secure vacuum seal.
• Critical incompatibilities:① Avoid leather dashboards/breathable surfaces: These prevent a tight vacuum seal, risking device detachment.② Reject textured/granular/curved surfaces: Large particles, unevenness, or curves compromise suction strength and stability.
• 📱📱📱 𝗜𝗻𝘀𝘁𝗮𝗹𝗹𝗮𝘁𝗶𝗼𝗻 𝗦𝘁𝗲𝗽𝘀 (Key to Suction Performance): To maximize suction and avoid common failures: ① Thoroughly clean the surface with a microfiber cloth to remove dust/oils. Peel off the protective film from the included pad completely (residual film blocks adhesion). ② Press the pad firmly for 10+ seconds—ensure no air bubbles remain (air pockets lead to weak seals). ③ Attach the suction cup to the pad’s center and lock it securely. Note: Poor installation (e.g., partial film removal) is the top cause of early suction loss.
• The More the Car Shakes, The More Stable It Is: Innovative design for trucks/pickups/Jeeps: Unlike traditional mounts that loosen, this electric mount strengthens grip with motion. Patented tech ensures unwavering hold on bumpy terrain—ideal for off-road or rough roads.
• Warm Tips for Optimal Performance & Reduced Noise: ① Pre-use prep: Remove the transparent plastic film from the base before first use—failure to do so blocks proper suction (common user error causing "suction doesn’t work" complaints). ② Battery alerts: Red light signals low charge; full charge lasts ~1 month (no phone charging function included). ③ Noise clarification: A subtle "pssst" sound during suction is normal (air release). Unusual/constant noise often stems from dirty/rough surfaces—reinstall on a smooth, dust-free area to prevent excessive pumping.
• Epic Upgrade: Brand New Suction for Unwavering Stability: Industry-leading smart car phone holder with 300+ detections/second (auto-monitors adsorption strength to prevent loosening without manual adjustments). Critical note: Vacuum activates on contact, but requires a smooth, flat surface (curved/wooden/uneven surfaces trigger continuous pumping, causing noise and battery drain).
• Exclusive 5 Patents: Strongest Suction & Quiet Operation: 5 proprietary patents ensure: Hourly automatic air expulsion for firm grip on bumpy roads (no manual buttons needed). Normal operational sound (confirms active suction); unusual noise indicates surface issues (e.g., dust/granules). Pre-install check: Verify surface is smooth/flat/dust-free to avoid excessive noise or weak suction.
• Zero-Damage Guarantee & Enhanced User Experience: 2025 electric car mount grips windshields without marks/scratches (unlike vent mounts that bend fins or traditional suction cups leaving rings). Surface-safe adhesive works in -20°F to 100°F. Clean removal preserves vehicle interiors—no residue or damage when installed correctly. Pro Tip: For long-term performance, periodically clean the suction cup and pad with mild soap/water. Avoid exposing to extreme heat (>100°F) to prevent adhesive degradation.