LANGF ET-LAV200 Replacement Projector lamp for P ANASONIC PT-VW430 PT-VW431D PT-VW435N PT-VW440 PT-VX500 PT-VX505N PT-VX510

Lamp model:ET-LAV200 Wattage: 280W Lamp Life:3500-5000 Hours Warranty time: 180 Days TYPE: 1*new replacement projector Lamp bulb with housing COMPATIBLE MODULES(Ctrl+F to find your model) : Fit For PANASONIC PT-VW430 PT-VW430EA PT-VW430U PT-VW431D PT-VW435N PT-VW435NEA PT-VW440 PT-VW440U PT-VX500 PT-VX500U PT-VX505N PT-VX510 PT-VX510U Projectors ; If you're not sure whether it's compatible with your projector, or if you have any problems when using it, you can send us an email or leave a QA. Our after-sales team will help you. 9 steps to replace the projector lamp 1.Gather the necessary tools, screwdriver. 2.Turn off TV or Projector. 3.Remove Lamp Compartment Door. 4.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp! 5.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment. 6.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out. 7.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly. 8.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual. 9.You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.