IC ICLOVER Pool Alarm with Remote Receiver, Immersion Drown Monitor System, Poolside Alarms for Inground & Above Ground Pools, Wireless Swimming Pool Water Motion Sensor Kids Toddler Pets Safety Guard

Features

• Water Motion Sensor & Receiver - The poolside motion sensor detects water surface fluctuations, triggering the remote receiver to sound a critical alarm in the event of a child drowning in the swimming pool. The alarm prompts immediate rescue action with a rapid response time.
• Wireless Flashing Receiver Alarm - The receiver alarm will give out sounds with LED flashing at the same time when children or pets fall into the pool or pond. The 85 dB alarm will be triggered when a over 13-lb-weight object is detected. Must test the alarm after installation.
• 4 WORKING MODES - 4 different modes: Surveillance, Swimming, Mute, and Off. Press the button and move to change its working state. This design prevents accidental touches and is suitable for a wider range of scenarios.
• 2 INSTALL METHOD - Method #1: Punch holes at the edge of the pool and secure with screws. Method #2: Use strong double-sided adhesive to secure it to the edge of the pool. (All installation accessories are included in the package)
• Adaptation Pool Type - This poolside alarm is suitable for inground & above ground pool. The poolside unit is suggested to be installed in the pool less than or equal to 16x32sq.ft. The tube should be submerged under the water surface about 3.9".
• Not A Life-saving Device - Pool Alarm is just a pool safety alarm system, but not a life-saving device! Any safety consideration such as adult supervision, lifeguards or fences should not be replaced!