Heavy Duty Hose Crimper, Standard Hose Crimping Tool with Ferrules (100PK) –50 x 0.593" ID & 50 x 0.656" ID–Fits 1/4", 5/16", 3/8" PVC, Rubber and Air Hoses, Bench Hose Crimping Tool

Features

• What in The Box: A heavy duty hose crimper, an instruction manual, one packet of F7326 and one packet of F7328 ferrules, each packet containing 50 pieces. F7326: Length: 1.0 inch, Inner Diameter: 0.593 inch, Hole Diameter: 0.437 inch, Wall Thickness: 0.025 inch, Material: C46500 Brass. F7328: Length: 1.0 inch, Inner Diameter: 0.656 inch, Hole Diameter: 0.437 inch, Wall Thickness: 0.025 inch, Material: C46500 Brass.
• Heavy-Duty Construction, Built to Last: Our heavy duty standard hose crimpers are constructed with heat-treated steel molds and ductile iron, featuring reinforced frames and hinge points for exceptional durability. Perfect for high-frequency use in workshops, garages, and industrial settings.
• Product Applicability: For your convenience, our heavy duty bench hose crimping tool is equipped with five crimping dies, with die sizes of: 0.44 inches, 0.48 inches, 0.53 inches, 0.58 inches, and 0.63 inches. In addition, 5/16 inch single braid, 5/16 inch double braid, 13/64 inch single braid, and 13/64 inch double braid, as well as 1/4 inch single braid, PVC, and rubber hoses can all be used with our heavy-duty standard hose crimping tool.
• Portable and Desktop Use: This air hose repair kit is conveniently designed for permanent installation or use on the go. Adjustable pressure screws ensure perfect coiling for various hose sizes, making it an essential tool for mechanics, welders, and DIY enthusiasts.
• Important Note: For safe use: Ensure the compression arm is in the closed (downward) position, then adjust the screw to make contact with the stopper. The screw adjustment must not be set lighter than the end stopper. When using extra-large hoses, adjust the screw tightness to avoid the edge being too deep.