HICTOP Bambu Lab Hotend X1 Carbon Assembly with Removable Hardened Steel 0.4mm Nozzle Hotend for Bambu Lab X1 Series 3D Printers

Features

• 1. It is a bambu lab complete hotend without hotend cooling fan and retaining clip, the assembled hotend with hardened steel 0.4mm nozzle, the ceramic heater and thermistor a silicone cover and a thermal grease are included
• 2. The bambu lab hotend is compatible with X1 Series 3D printers but not P1 Series as the ceramic heaters as thermistors for them are different for them
• 3.The heat sink, throat, heat block and the removable hardened steel 0.4mm nozzle are assembled, you only need to assemble the ceramic heater and thermistor or keep them for later use
• 4.The hardened steel 0.4mm nozzle is removable, you can remove the nozzle the nozzle with just a wrench no need to grab the heat sink, it is a great choice if you often change the nozzle
• 5. Please put some thermal grease on the thread of the nozzle heat up the bambu lab hotend to about 260℃ when changing the nozzle, it helps you to prevent it from leaking, please take care of your hand