HDMI Switch 4 in 1 Out, Tendak 4K HDMI Switch Box with Remote Control & PIP, 4 Port HDMI Switcher Selector Support 4K@30HZ, 1080P@120HZ,3D, Compatible with PS5/4/3, DVD

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• 4 In 1 Out HDMI Matrix: The HDMI switcher allows you to connect up to 4 HDMI input source devices to 1 HDMI display. Easily connect multiple devices (such as game consoles, computers, TV boxes, etc). All ports are on the same side for easy wiring, reduce the confusion of devices cable connections.
• 4K@30Hz High Resolution: The HDMI selector switch supports resolutions up to 4K@30Hz and is backward compatible. Support HDCP 1.4, DST-HD, Dolby-true-HD, LPCM 7.1, DST, Dolby-AC3, DSD, deep color 30bit, 36bit, 48bit. Ensure that each input signal can present a fine and clear picture, bringing the ultimate visual experience.
• HDMI Switch with PIP Function: support picture-in-picture display, can watch multiple signal source content at the same time, the main screen and sub-screen freely switch, you can see one main screen and three sub-screen presentations. The position of each sub-picture corresponds with the input number. (Note: In PIP mode, audio will only be played from the full-screened source. Also, if your TV/display resolution is over 1080p, the 3 sub-screens will appear smaller within the display.)
• Easy to Operate: HDMI switch box automatically detects and switches to your active device, with 4 bright LED indicators showing the active port. No drivers needed, plug and play. Conveniently control it using either the included IR remote (battery not included) or the front panel buttons for instant source switching. Works seamlessly with nearly all HDMI-enabled devices for ultimate compatibility.
• If the device don't working, try these steps: For no signal, check power and connections, then test inputs. If input signal can't switch, use the front panel button or remove obstacles between the remote and device, operate at close range. For no sound/audio anomaly, set output to HDMI or upgrade your HDMI cable. If the screen flickers, lower resolution or use a shorter HDMI cable.