Go Kart Clutch 3/4 Bore 12T fit #35 Chain, Centrifugal Clutch for Minibike and Fun Kart, Compatible with Honda GX160, GX200, GX 140, GX120, GC160, GC190, Harbor Freight, Briggs and Stratton Tecumseh

Features

• 【Suit for】: 3/4" Bore 12 Tooth Centrifugal Clutch fit for #35 Chain, Common Clutch for 2-6.5 HP Engines, Engagement Speed 2300±300 RPM.
• 【Compatible with】: This Clutch kit is compatible with 2-6.5hp Honda & Honda cloned engines for GC160 / GC190 / GX120 / GX140 / GX160 / GX200. Also fit for Tecumseh and Briggs Stratton engines 2-6.5HP with 3/4"shaft. Common clutch for 3.5-7hp engines using #35 Chain.
• 【Tips】: Also fits for most 5.5/6.5 HP clones, 4-7 motors in all brands and any other engines with 3/4 crank shaft and 3/16” key way. Before installation, you need to drop a circle of lubricant above the snap ring and wait for it to penetrate, you can rotate it without any obstruction (please refer to the picture for the exact position).
• 【Pre-use test】 When the clutch is just installed and started to run, it needs 3-5 times to break in. The method is as follows, first, no load running to the clutch first engagement, keep it for 10 seconds and then turn off the engine to cool down; second, load gradual 3 times from 0 to full speed, each interval of 2 minutes to cool down. If there is no problem after these two steps, you can avoid the problem that insufficient speed will cause the clutch internal dumping block and clutch shoe, and insufficient contact area will lead to slipping and friction smoke.
• 【Package including】:1 x Centrifugal Clutch, 1 x accessories kits.
• 【After-Sales Service】:High quality assurance! And we provide after-sales service policy. If you have any problems, please contact us first, we will try our best to solve your problem.