Epindon Hall Effect Replacement Stick Module Compatible with Victrix Pro BFG Wireless Controllers (Both PS5 & Xbox Version) - Left Stick(80G)

Features

• A hand-made personalized stick module compatible with Victrix Pro BFG controller by Epidnon, and a T2.0 screwdriver was included.
• No Drift Hall Effect Sensor Sticks:Revolutionary electromagnetic stick module solves the drifting problem, and increasing the precision and durability.
• Improve module issues such as drift by replacing existing module on the Left stick.
• Easily installation. Unscrew the screws of faceplate and stick module PCB board with attached T2.0 driver; Replace the stock module with Epindon customized hall effect electromagnetic module.【Attention : 】please insert and remove connector pins of left stick module slowly.
• Calibration is required after installation. Calibration method: Press the L( R )stick and function button at the same time, the function button LED will flash. At that time, turn the L(/ R) stick left (counterclockwise) and right (clockwise) 3 times each. Then press the function button again, the white LED will turns off to complete the module Calibration.【TIPS:】Place the controller on a flat, horizontal direction to ensure accurate calibration. it may be necessary to recalibrate for several times.
• 【NOTE:】Place the controller on a flat, horizontal direction to ensure accurate calibration. it may be necessary to recalibrate for several times.
• 【Warm tips:】All our stick modules are tested and 1 month warrantly; any questions or concerns , Please contact: support@epindon.com.