ECCPP 5x112 to 5x112 Wheel Spacers hubcentric 20mm 5 lug Fit for Au-di A5 2008-2016 for Au-di A5 Quattro 2008-2016 for Au-di A6 2012-2017-4PCS

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• CHECK BEFORE YOU PURCHASING : 20mm Wheel Spacers 5x112 to 5x112 Please verify the bolt count,bolt circle diameter,center bore,and bolt size match your vehicle before ordering.Enter your Year/Make/Model in system garage filter(AMAZON CONFIRMED FIT)to validate product fitment
• INSTALLATION WITH CONFIDENCE : Wheel Spacers 5x112 to 5x112 with Thickness:20mm| Vehicle Bolt Pattern:5x112| Wheel Bolt Pattern:5x112| Thread Pitch:14x1.5| Hub Bore:66.6mm | Out Diameter:153mm| Recommended Install Torque:85-90 Ft/Lbs| Package Include:4 pcs Wheel Spacers with Thread locker glueFor Amazon Secondary Packaging, if you only receive 2pcs, please email us and we will reissue the rest for you
• SUPERIOR SAFETY AND STABILITY : Hubcentric wheel spacers 5x112mm - support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
• INSTALLATION TIPS FOR YOU : Please Make sure that your Vehicle hub bolts size MUST equal to this Wheel Adapters'thread pitch 14x1.5.Requires standard tire repair tools, a torque wrench, and lug socket.Check and re-torque all hardware, including open-end lug nuts securing adapter to wheel hub after some 50-100 miles
• WHEEL SPACES LUG BOLT DESIGN : While 12.9's are stronger but less ductile which is an issue in a failure scenario. Pre-installed heat treated 10.9 grade studs are more appropriate in the sense that they have h-igher plastic strain energy, or in simpleton terms: will tend to deform rather than snap.10.9's are more than sufficient for a car application in terms of strength and for the reasons mentioned above are more desirable than 12.9's