ECCPP 2X 1.25 inch Wheel Spacers hub Centric 5 Lug 5x4.5 to 5x4.5 5x114.3mm to 5x114.3mm Fits 2002-2012 for Jeep Liberty 1987-2006 for Jeep Wrangler 2007-2011 for Edge

Features

• Compatibility List Included : Wheel Spacers 5x114.3 to 5x114.3 hub centric Fit for 1980-2001 for Jeep for Cherokee 1986-1992 for Jeep for Comanche 1993-1998 for Jeep for Grand Cherokee 2002-2012 for Jeep for Liberty 1987-2006 for Jeep for Wrangler
• Installation with Confidence : Wheel Spacers 5x4.5 1.25in with Thickness:1.25",Vehicle Bolt Pattern: 5x4.5(5x114.3mm) ,Wheel bolt Pattern:5x4.5(5x114.3mm) ,Inner Diameter:71.5mm,Thread Pinch:1/2"x20；(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
• Superior Safety And Stability : Hubcentric wheel spacers 5X4.5 WHEEL SPACERS 1.25 inch - support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
• Excellent Driving Experience : Our 5X4.5 to 5x4.5 wheel spacers provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
• Check before You Purchasing : 5 lug wheel spacers hub centric Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 1/2 threads; 2) You have more than 1.25 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1.25 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 71.5mm,advise torque specs at 75-85 Ft/Lbs