ECCPP 2PCS 5x4.5 Wheel Spacers Hubcentric 20mm 5 Lug 5x114.3mm Fit for 2002-2015 for Nissan Altima 2009-2015 for Nissan GT-R 2011-2014 for Nissan Juke

Features

• Compatibility List Included : 20mm HUB CENTRIC SPACERS 5 LUG Fit for G35 2003-2008, for G37 2009-2015, for G20 2011-2012, for LEAF 2011-2014 |2011-2015 for Nissan Leaf 1989-2014 for Nissan Maxima 2003-2015 for Nissan Murano 2013-2014 for Nissan Pathfinder
• Installation with Confidence : 5X114.3 TO 5X114.3 WHEEL SPACER with Thickenss:20mm,Vehicle Bolt Pattern:5x4.5 or 5x114.3mm;Wheel Bolt Pattern:5x4.5 or 5x114.3mm,Inner Diameter:66.1mm,Thread Pinch:12x1.25.2PCS Wheel Spacers Included;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
• Superior Safety And Stability : wheel SPACERS 20mm Hub-centric design with additional centering collar with perfect fit in mind makes the spacer function as a precise extension of the axle hub,ensuring precise wheel fitment while el-iminating risks from vibration- support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
• Strict Quality Performance : The 25mm WHEEL SPACERS HUBCENTRIC 5X4.5 to 5x4.5 WHEEL SPACER HUB CENTRIC are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.CNC automatic processing ensures high accuracy and stability. These forged 6061 t6 aircraft aluminum wheel spacers are stronger
• Check before You Purchasing : 5x114.3 wheel spacers Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 12x1.25mm threads; 2) You have more than 20mm of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 20mm (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 66.1mm,advise torque specs at 70-80 Ft/Lbs