ECCPP 2PCS 5 Lug 1" Hubcentric Wheel Spacers 5x4.75 to 5x4.75 fit for 1953-1981 for Chevrolet Corvette 1959-1987 for Chevrolet El Camino 1967-1981 for Chevrolet Camaro

Features

• COMPATIBILITY LIST INCLUDED : HUBCENTRIC Wheel Spacers 5X4.75 Fit for 1964-1973 for Chevelle 1962-1968 for 1953-1981 for Corvette 1973-1973 for Chevrolet Laguna 1964-1981 for Chevrolet for Malibu 1970-1981 for Chevrolet Monte Carlo 1969-1979 for Chevrolet Nova
• INSTALLATION WITH CONFIDENCE : 1 INCH Wheel Spacers 5 LUG HUB CENTRIC with Thickness:1" or 25mm;Vehicle Bolt Pattern:5x4.75 or 5x120.65mm;Wheel Bolt Pattern:5x4.75 or 5x120.65mm;Thread Pinch:7/16";Inner Diameter:70.3mm ;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
• SUPERIOR SAFETY AND STABILITY : Hubcentric wheel spacers 5x4.75 WHEEL SPACERS 1 inch - support and center the wheel to better resist impact loads from different road conditions and eliminate the risk of vibration.CNC automatic processing technology is used to ensure high precision and stability. The 10.9 stud can reach a tensile strength of 1000MPa, providing better structural support and safety.strict quality control, improve vehicle handling and stability, and prevent roll
• STRICT QUALITY PERFORMANCE : The 25mm WHEEL SPACERS HUBCENTRIC 5X4.75 Wheel SPACERS are made of high-quality forged 6061-T6 billet aluminum alloy and CNC precision machining, and the surface anodized coating can also protect the metal surface from environmental erosion under extreme conditions.CNC automatic processing ensures high accuracy and stability. These forged 6061 t6 aircraft aluminum wheel spacers are stronger
• CHECK BEFORE YOU PURCHASING : Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 7/16mm threads; 2) You have more than 1 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 70.3mm,advise torque specs at 70-80 Ft/Lbs