ECCPP 2PCS 3 inch Wheel Spacers 8 Lug 8x6.5 to 8x6.5 fits for Chevrolet Silverado 1500 HD for Chevrolet Silverado 2500 HD for Chevrolet Silverado 3500 for Suburban 2500 for Ram 2500 3500

Features

• Compatibility List Included : Wheel Spacers 8x6.5 COMPATIBLE WITH for 2002-2006 for Chevrolet Avalanche 2500 | 1988-1998 for Chevrolet C2500 | 1988-1998 for Chevrolet C3500 | 1997-2014 for Chevrolet Express 2500 | 1997-2014 for Chevrolet Express 3500 | 2007-2010 for Chevrolet Silverado 3500 HD | 2000-2013 for Chevrolet Suburban 2500
• Installation with Confidence : WHEEL SPACER 8 LUG Thickness:3" or 75mm;Bolt Pattern:8x6.5 or 8x165.1mm to 8x6.5 or 8x165.1mm;Inner Diameter:126.15mm;Outer Diameter(7.913 inch),Thread Pinch:14x1.5;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
• Excellent Driving Experience : WHEEL SPACERS 8x6.5 3 inch provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
• Little Change Huge Difference : These 8x6.5 to 8x6.5 WHEEL SPACERS make your vehicle have a more aggressive stance by giving it a slightly wider stance. And you can enjoy off-roading! Because tire spacers give your car better grip, more acceleration and better handling. And through mounting tire spacers give you more flexibility, because they allow for large brake caliper installations or lift/lowering kits
• Check before You Purchasing : Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 14x1.5mm threads; 2) You have more than 3 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 3 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 126.15mm,advise torque specs at 85-90 Ft/Lbs