ECCPP 1.5 inch 6x5.5 to 6x120 Wheel Adapters 6LUG with 14x1.5 Studs 78.3CB to 66.9CB For Chevrolet Silverado 1500 1999-2025 For Chevrolet Suburban 2015-2025 -4PCS NOT FIT Stock Rims

Features

• Installation with Confidence : Hub Centric Wheel Adapters 6x5.5 to 6x120 with Thickness:1.5 inch;Bolt Pattern:6x5.5 to 6x120;Thread Pitch:14x1.5;Inner Diameter(Hub Bore):78.3;Advise Torque Specs:85-90 Ft/Lbs;(Vibration can be avoided by simply following the recommended torque for installation, keeping the wheel adapters & spacers tight against the hub and Clean the rust of wheel and hub surfaces)
• Compatibility List Included : 1.5 6 lug Wheel Adapters FIT for Chevrolet K2500 1994-2000 || for Chevrolet Savana 1500 2003-2012|| for Chevrolet Suburban 2015-2020 Fit for C2500 1993-2000|| for Chevrolet Astro 2003-2005 || for GMC Yukon XL 1500 2000-2008 Fit for Chevrolet Express 1500 2002-2012|| for GMC Yukon 1992-1995
• Excellent Driving Experience : Our 6x5.5 to 6x120 wheel spacers Adapters 1.5 INCH CHANGE YOUR BOLT PATTERN FROM 6x5.5 to 6x120.Provide your car with an aggressive appearance while adding safety and stability to your car. It can effectively increase the wheelbase of the car, balance the center of gravity of the body, reduce body deformation, and solve the problems of drifting and tilting when the car is driving at high speeds and cornering at high speeds
• Little Change Huge Difference : These wheel adapters & spacers 6x5.5 to 6x120 wheel adapters make your vehicle have a more aggressive stance by giving it a slightly wider stance. And you can enjoy off-roading! Because tire spacers give your car better grip, more acceleration and better handling. And through mounting tire spacers give you more flexibility, because they allow for large brake caliper installations or lift/lowering kits
• Check before You Purchasing : Even if a vehicle is listed as being compatible, buyers still need to check: 1) Wheel studs are 14x1.5mm threads; 2) You have more than 1.5 inch of space between your fender and your wheel/tire; 3) Your factory wheel studs are shorter than 1.5 inch (NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit); 4) Wheel center bore needs to be no smaller than 78.3mm,advise torque specs at 85-90 Ft/Lbs