Dikale PLA+ 3D Printer Filament 1.75mm No Tangle, Neatly Wound Filament Net Weight 250g Spool, PLA Pro Plus,Silk Silver

Dikale PLA+ 3D Printer Filament 1.75mm No Tangle, Neatly Wound Filament Net Weight 250g Spool, PLA Pro Plus,Silk Silver dikale 3D printer filament has five advantages: 1. High purity, non toxic and low odor. 2. High precision, dimensional tolerance ± 0.03mm. 3. High strength, better toughless, low shrinkage. 4. Minimal warping, no print head clogging. 5. Compatible with most of FDM 3d printers. Recommend: PLA+ Nozzle Temperture: 190-220 °C. PETG Nozzle Temperature: 210-230°C. No Fan. Hot Bed Temperature: 55-75. First Layer Printing Speed: 20-25mm/s. Normal Printing Speed: 30-60mm/s. FAQ: Stringing or oozing occurs when marginal lines of plastic are left behind or in between the objects while the nozzle moves to another point due to incorrect retraction settings, a loose belt, printing temperature set too high, and/or poor quality filament being used. Solutions include the following: 1. Running a basic retraction test to adjust the optimum retraction value. If retraction is enabled, the filament will be pulled back into the nozzle to act as a countermeasure against oozing. The optimum speed is 6000 mm/min (20–100 mm/s). 2. Ensure that all tension belts are tightened. 3. Lower the printing temperature by 5 to 10 ◦C. 4. Post-process the parts to remove strings by using a heat gun. For PLA and ABS parts, set the heat gun at 200 ◦C to melt the strings and the printed object should remain undamaged.