CARORAV 433Mhz Tire Pressure Monitoring System Sensor Compatible for BMW Rolls Royce MINI Ferrari, TPMS Sensor Replaces 36106798872 36106890964 F11001648001B 4 Pack - 4 Replaceable Valve Stems

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

More features

• [FITMENT]: The CARORAV tire pressure sensor fit for BMW/Rolls Royce/MINI/Mclaren/Ferrari.Please refer to Product Description for specific application of model and year
• [REPLACE PART NUMBER]: 36106798872, 36106890964, F11001648001B
• [PRE-PROGRAMMED]: PRE-PROGRAMMED DO NOT mean the sensor will automatically match your vehicle, it need to require a re-learning/reset operation. And some re-learning/reset procedures may require a professional diagnostic scanner or activation tool
• [VERIFY VEHICLE FITMENT]: 1.Check “amazon confirmed fit” at the top of the page to determine the compatibility of your vehicle, 2. Check the matching information related to “APPLICABLE MODELS” on the page, 3. Please feel free to contact us if you have any questions
• [ATTENTION]: STOP INSTALLATION if it has no response. Before installation, pls use tpms tool to scan the tpms sensor. If it can't be read or triggered correctly, DO NOT proceed with the sensor replacement installation
• [HOW TO RELEARN]: OBDII RELEARN: 1.OBDII connector is required, 2.Confirm TPMS sensors are properly installed, 3.Adjust tire pressures to placard value, 4.Activate TPMS tool on left front tire sidewall next to the valve stem, 5.Repeat for Rf/RR/LR tires, 6.Apply OBD connector to DLC, 7.Tern ignition to ON, 8.Press OK on TPMS Tool to transfer date to ECU, 9.Disconnect OBD connector from DLC, 10.Turn ignition to OFF then start the engine, 11.Drive for at least 5 minutes at 28 mph