Brinonac for iPhone 6 Screen Replacement Black Touch Display LCD Digitizer Full Assembly with Front Camera,Proximity Sensor,Ear Speaker and Home Button Including Repair Tool and Screen Protector

●Compatibility: iPhone 6 ●Color: Black ●Package includes: -1 * New iPhone 6 LCD Screen and Digitizer(Pre-assembled with front camera, ear speaker, light & proximity sensors,and home button) -1 * 0.2mm tempered glass protective film -1 * Repair tools set -1 * User's Guide ● Note: 1. We strongly recommend that you watch the instruction video on YOUTUBE before installation through scanning the QR code in the manual or searching "Replace iPhone 6 Screen". 2. Disconnect the battery cable before installation or make sure your phone is powered off. 3. Please mark the position of each screw when you unscrew the screws. Because there are many screws in different sizes,if screws are placed in the wrong hole,then the screen might be damaged. 4. Please connect the flex cable one by one and make sure all the connector well seated.The flex cable will be properly connected with a "click" sound. 5. After connecting the flex cable,please test the LCD screen to make sure the flex cables are in good condition and no debris on the connector. 6. Touch ID and fingerprint identification only can work on your original home button.You will need to transfer the home button from your original screen to the new one. 7. If you have any question,please contact us directly,We will try our best to help you out,thanks.