BOSYTRO Upgraded Output Port 24V 25A 600W DC Switching Power Supply, Universal Transformers AC110V/220V (SMPS), 24 Volt Power Supply for 3D Printer, CCTV Camera Security System (Without Power Cord)

Features

• 【AC/DC 24V Power Supply】1.24V 25A 600W Power Supply . Input: AC 110/220V; Output: Default DC 24V, Adjustable range: ±10%, Adjustable voltage range is 21.6V-26.4V, which greatly extends its application range and can provide up to 480 watts of maximum power with an efficiency of up to 80%. When connecting equipment with high peak variations, such as motors, please select a power supply at least 2 greater than the rated power of the equipment to ensure safety.
• 【AC/DC 24V Power Supply】2. 24 volt power supply, Three output channels are available to supply power to multiple load devices.The new BOSYTRO power supply updates the output ports and adds a power port, eliminating the need to connect separate power cables (Fire, Ground, and Zero) and making connections easier and faster.
• 【Good Heat Dissipation】The power transformer is made of porous metal aluminum material, low noise and good and stable heat dissipation. The 600W power supply with intelligent temperature control fan, only to reach a certain operating temperature when the fan will run, in order to prevent the converter overheating and failure;The operating temperature range of this switching power supply: 14℉-140℉.
• 【Multiple Protections】24 Volt 25A 600W dc power supply is strictly tested before leaving the factory, smart chip provides overload auto power off/over voltage auto power off/over heat auto power off/short circuit protection, 110v to 24V converter is RoHS/CE/LVD/EMC safety certified; lead-free process, meets the environmental protection RoHS requirements; provides effective protection for your power safety.
• 【Input Voltage 115V/230V】There is a voltage switch on the side of the 24v dc transformer, we set 115V for American customers at the factory, before using, please check whether the input voltage is 115V, please switch to the local country's voltage to use; to avoid the voltage mismatch damage to the power supply equipment.
• 【Wide Applications】 The unit converts AC mains power to low voltage DC 24V with a peak power of 25A 600 watts, which works perfectly with most 24V devices under 600 watts, such as LED strips, 3D printers, ham radios and more. LED power supply will automatically output 0~20A to match your device, the actual current depends on the load, such as 5A (120W), 10A (240W), 15A (360W), 20A(480W).... please make sure your load device matches the 24V supply voltage and the current is less than 25A. Please do not overload it and do not use it as a charger, it is just a voltage converter.