BINWUHI HVAC Heater Blower Motor with Fan Cage Compatible with The Following Models: 2011-2020 Toyota Sienna, 2008-2022 Toyota Sequoia, 700298 871030C051 Air Conditioning Motor Fan Assembly

If the fan doesn’t work, before pointing the finger at the blower motor, check fuses for the motor to make sure they’re still good. Blower motors that make loud squeaks or rattling noises may be worn out and on the verge of packing it in, but sometimes those noises are caused by leaves or other debris that can be cleaned out after the motor is removed from the vehicle. We know you want the best driving experience possible - and that includes the comfort of air conditioning in the summer and heat in the winter. Without a functioning heater blower motor, neither of these are a possibility. Find the perfect replacement for your damaged heater blower motor at BINWUHI and hit the road in comfort once again. Compatible with The Following Models: 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Toyota Sienna 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 Toyota Sequoia Compatible with The Following Part Numbers: 75050 700298 871030C051 87103-0C051 【NOTE】Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchase this Blower Motor. *--HOW TO INSTALL A NEW BLOWER MOTOR: 1.Remove the screws under the passenger side dashboard of the vehicle. 2.Find the HVAC blower motor. 3.Disconnect the blower motor electrical connector. 4.Remove the old blower motor. 5.Compare the new blower motor to the old one to verify that you have the correct part. 6.Install the new blower motor into the box and tighten the screws. 7.Connect the blower motor electrical connector. 8.After the installation is complete, turn on the air conditioner and check if it is running normally.