BI-DTOOL Electric Grain Mill Grinder 2000g Stainless Steel Pulverizer 36000r/min High-speed Grain Mill 3500W Dry Material Grinding Machine 270° swingable Superfine powder for Home and Commercial

Note: 1. Please note that the carbon brush screws on the bottom of the machine should not be tightened too much to avoid smoke and odor when using. Simply remove the carbon brushes on both sides of the bottom of the machine and reinstall them to solve the problem. 2. If the humidity or hardness of the abrasive material is too high, you need to check whether the blade is stuck. When using the product again, you need to press the overload protector and shake the machine while working to prevent the blade from jamming again and causing the machine to overload. Brief Description: The Electric Grain Mill Grinder is made of 304 food-grade stainless steel to ensure food safety and easy to clean. The cover of the electric grain mill is equipped with a safety induction switch.When the cover is opened while the machine is working, the grain mill will automatically power off and stop working to ensure safety in use. The spice grinder is equipped with an upgraded overload protector. When the grinder is overloaded, the machine will automatically power off and stop working to prevent the motor from burning out in the overload/overheating condition. After the machine cools down, press the overload protection switch for the grinder to continue working. This electric grinder is suitable for various dry/dehydrated materials such as coffee beans, soybeans, rice, corn, wheat, pepper, cumin, dried peppers, animal feed and herbs, etc. (NOTE: Not suitable for wet, fresh, oily or sticky materials.).Various dry materials can be quickly crushed in 30 seconds-3 minutes, it is recommended that the continuous working time should not exceed 3 minutes to avoid problems such as machine overload. After grinding, please clean the remaining powder inside the jar with a cleaning brush and then wipe the inside of the jar with a dry cloth. (The grinding jar is not removable, so do not use water to clean or rinse the motor base directly to avoid damage to the motor). Product Parameters: Capacity: 2000G Voltage: 110V Power: 3500W Work Time: 0-5 min. Interval Time: 5 min. Rotating Speed: 36000r/min Grinding Degree: 50-300 Mesh Meterial: 304 Stainless Steel