AURSINC Allstar RF Node UHF SR-FRS Radio Programming Module Pi-hat for Allstar, Echolink, APRS, Digital Modes Compatible for Raspberry Pi 2/3/4, Pin to Pin Replace SA-818 Module, UHF Freq 400-470

Photo 1 of AURSINC Allstar RF Node UHF SR-FRS Radio Programming Module Pi-hat for Allstar, Echolink, APRS, Digital Modes Compatible for Raspberry Pi 2/3/4, Pin to Pin Replace SA-818 Module, UHF Freq 400-470

1/3

2/3

3/3

Ended

Won For

Search Active Auctions

Description

Example [root@allstar ~]# python srfrs.py version SRFRS: INFO: Firmware version: 110U-V223 [root@alarmpi SRFRS]# python srfrs.py radio --frequency 438.500 SRFRS: INFO: +DMOSETGROUP:0, RX frequency: 438.5000, TX frequency: 438.5000, squelch: 4, OK [root@alarmpi SRFRS]# python srfrs.py radio --frequency 438.500 --offset -5 SRFRS: INFO: +DMOSETGROUP:0, RX frequency: 438.5000, TX frequency: 433.5000, squelch: 4, OK [root@allstar ~]# python srfrs.py radio --frequency 145.230 --offset -.6 --ctcss 100 SRFRS: INFO: +DMOSETGROUP:0, RX frequency: 145.2300, TX frequency: 144.6300, ctcss: 100.0, squelch: 4, OK [root@allstar ~]# python srfrs.py volume --level 5 SRFRS: INFO: +DMOSETVOLUME:0 Volume level: 5 Radio usage: srfrs radio [-h] --frequency FREQUENCY [--offset OFFSET] [--squelch SQUELCH] [--ctcss CTCSS | --dcs DCS] optional arguments: -h, --help show this help message and exit --frequency FREQUENCY Transmit frequency --offset OFFSET 0.0 for no offset [default: 0.0] --squelch SQUELCH Squelch value (1 to 9) [default: 4] --ctcss CTCSS CTCSS (PL Tone) 0 for no CTCSS [default: None] --dcs DCS DCS code must me the number followed by [N normal] or [I inverse] [default: None] Volume usage: srfrs volume [-h] [--level LEVEL] optional arguments: -h, --help show this help message and exit --level LEVEL Volume value (1 to 8) [default: 4] CTCSS codes (PL Tones 38 Sets) 67.0, 71.9, 74.4, 77.0, 79.7, 82.5, 85.4, 88.5, 91.5, 94.8, 97.4, 100.0, 103.5, 107.2, 110.9, 114.8, 118.8, 123.0, 127.3, 131.8, 136.5, 141.3, 146.2, 151.4, 156.7, 162.2, 167.9, 173.8, 179.9, 186.2, 192.8, 203.5, 210.7, 218.1, 225.7, 233.6, 241.8, 250.3

Item Details

Seller

Nellis Auction

Pickup Location

8928 E Ray Rd Suite 101

Mesa, AZ, 85212

Quality

Used

Functional

No Damage

No Assembly Needed

In Package

No Missing Parts

Estimated Retail Price

$67.28

Buyers Premium

15%

Inventory Number

1044566754

Found in

Electronics Computers, Laptops, Tablets & Accessories

Additional Details from the Manufacturer

This item information is coming from the manufacturer. Some of the details may vary from the Nellis Auction listing. Please check the Quality Rating and Notes for information specific to this listing

brand

AURSINC

color

WHITE

size

Allstar Raspberry 234 RF Node UHF SR-FRS Radio

weight

0.11 lbs

More features

[Upgraded Allstar Node] AURSINC Allstar Node SR-FRS Radio Programming Module (pin to pin replace SA-818 Module) is a versatile Raspberry-Pi hat that can be used for Allstar, Echolink, APRS, or any digital modes
[Working Mode] The both sides of the a TYPE C connecters have different function; PWR+COS(Flash) Communication with Raspberry on USB (main); PWR(GREEN) use /dev/ttyUSB0 to Change UHF RF node Frequency (only work when you want change UHF Freq (400-470)
[Additional Help] Use the program in this GitHub repository to program the radio module SR-FRS used for the Pi-Hat (github. com/jumbo5566/SRFRS) DCS Codes not support YET. Please refer to this link for setup questions: [allstarlink .github.io/adv-topics/sa818modules/#sa818]
[Four section on This Program] Radio-Program the radio (frequency/tome/squelch); Volume -Set the volume level; Filters-Set filters; Version-Show the firmware version of the SA818
[SR110U Board OLED Indicators] PTT flash red led light means RF transmit; COS in blue means receiving the RF signal; COM in YELLOW means audio data transmit; PWR means power supply is normal
[Package list & NOTE] A SR-FRS Radio Programming Module, USB C Cable and an Antenna. NOTE: Before programming the SR-FRS module, make sure you HAVE consulted the band plan for your country and transmit on a frequency you are allowed to use
[Compatibility issues] Compatible with Rpi 2, it can communicate directly with the Rpi 2 via the included Type C to USB cable. Please note that the USB connector should be properly inserted into the device

See the deals

Get in on the action, thousands of new items added daily. Bid and win!

Start bidding now