3L Resin Bubble Remover Machine, Electric Resin Silicone Curing Machine with Large Transparent Chamber for Resin Silicone Art Casting Crafting, Fast Bubble Removal in 5-10Mins

Using Tips - Place the cup in the center of the vacuum chamber. Avoid direct placement under the air extraction port to prevent resin splashing. - Lightly press the power button to start the vacuum. If the red light flashes and the buzzer alarms, it indicates that the lid is not tightly sealed. (Solutions: A. Firmly press the lid into place. B. Remove and reassemble the sealing ring on the lid, then try again. C. Hold the lid down with your hand for 5-10 seconds while vacuuming.) - The vacuuming process can be stopped at any time depending on the curing time, viscosity, temperature of the resin or silicone, as well as the actual defoaming effect - Press the RELEASE button before opening the lid when the operation is completed - When opening the lid, firmly hold the machine on a flat surface and slowly pry open the lid using your thumbs to avoid tipping the container and spilling the resin or silicone - Use a heat gun to remove small bubbles that remain on the surface of the resin Specification Voltage: 110V Chamber Capacity: 3L/ 0.8 gallons Material: PC, ABS Operating Noise: <60dB Single Use Limit: 4 cups of resin with a total amount of no more than 1.5L/0.4 gal Dimensions: 7.9 x 7.9 x 7.7 in Package Content 1 x Resin Bubble Remover Machine (US Plug)