30" Large Monarch Butterfly Habitat Cage, Outdoor Insect Mesh Cage Terrarium (Diameter 19mm Pipe)

This upgraded outdoor version PVC butterfly house (Diameter 19mm Pole) is easier to install by hand without tool, butterfly cage is for rearing and breeding butterflies, praying mantis and other bugs. Professional version butterfly enclosure is squarer, sits straight, does not rock or move. The size is 16.5" x 16.5" x 30", tall and wide, can hold 2 large milkweed plants or 3 small milkweed plants. Butterfly growing kits package includes: 1 x Outdoor Version Butterfly Habitat Terrarium. 1 x Quick start guide manual. Instructions: 1. Please follow the instructions or the assemble guide in Gallery to install the outdoor version butterfly habitat. 2. After opening your net cage, the PVC side will be creased from folding. Get the creases out quickly by blow drying the PVC with a hair dryer for about 5 minutes, or place PVC toward warm sun to relax wrinkles. 3. Always close the cage door so the zippers meet at the TOP CENTER. If a caterpillar is somewhere on the zipper, this will allow you to zip down the other side to open. 4. Clean the mesh cage after a disease outbreak or at season's end by soaking it in a 5% bleach solution (19 parts water to 1 part bleach) for about 20 minutes. The cage can be soaked in a tub or laundry tub. 5. Rinse your butterfly garden with water and then let it sun dry- hang it on a clothesline or put a rock on the floor so it won't blow away. 6. Store the outdoor version butterfly habitat in a dry and clean place, such as in a closet, behind a couch, etc.