2 Bar GM Style MAP Sensor Manifold Absolute Pressure Sensor Replacement for 213-1520 12569241

Sensor Wiring Details: Pin A = Sensor Ground (-) Pin B = Signal (ouput) Pin C = 5 V (+) Be careful when reinstall the MAP Sensor electrical connector. Please check the wiring details. Direct Replacement for 1994-2000 GM C/K Pickup Truck Suburban Tahoe Yukon 6.5L Diesel (MAP/Turbo Pressure Sensor) Calibration Data: 20 Kpa = 0.30 V 200 Kpa = 4.80 V Tech specs: This sensor reads up to 2 bar, or 15 PSI of boost. If you are planning to run more than 15 PSI of boost, we recommend the 3 bar MAP sensor. * Connector not included. GM-style 2 bar MAP sensor. This sensor is used to determine engine load on forced induction engines. This sensor is intended to be used on engines producing positive manifold pressure up to 1 bar, or roughly 15psi of boost. A new seal will be needed. Do not reuse the old seal. Please always verify part number and vehicle engine type.