10pcs E-Simpo 4Pin Gx24q CFL to E26/E27 Lamp Base Socket Adapter Converter.Need Rewire to Bypass Ballast to Avoid Burnt Smell Flick. (10-Pack)

Features

• 4Pin Inductive;Need BYPASS OR REMOVE the ballast before install E26/E27 Lamp, otherwise it may burnt, flick, smell etc. G24q Series (Female Socket Fixture) to E26 (Male Bulb Base) Adapter - Q series has a shorter tip than D series and is more common in the US.
• THE BALLAST IN YOUR FIXTURE MUST BE REMOVED OR BYPASSED FOR THESE ADAPTERS TO FUNCTION PROPERLY. CONSULT AN ELECTRICIAN IF YOU ARE UNSURE. DO NOT OPERATE A LED BULB WITH A BALLAST IN THE FIXTURE, DOING SO WILL LIKELY DAMAGE THE BULB.
• All pin-based CFL, like GX24Q G24 GX23 G23 are lamp-ballast separated, but all screw-in E26 E27 are lamp-ballast integrated. ballast is a must to start a high voltage(600V-1500V 1ms) to light up the CFL, but it is dangerous for LED Lamp. Because LED Lamp are built with LEDs and Driver which is transforming the 100-240V AC to DC for LEDs. So the LED Driver input should be 100V-240V or 85-265V, so 600-1500V will be too high, and easily destroy the led lamp.
• There are some LED Driver who can be compatible with the ballast, no LED Driver can be compatible with all the ballast. So the best thing is bypass or remove once we want to change CFL to LED Lamp. When we remove pin-based CFL, we only removed the lamp, the ballast is still working in front fixture; even we change to E26/E27 CFL, there will be 2 ballasts, the light will not work.